10-Port PWM Fan Hub, Splitter for 4-Pin & 3-Pin Fans – EZDIY-FAB

10-Port PWM Fan Hub, Splitter for 4-Pin & 3-Pin Fans – EZDIY-FAB

4.5
(138)
Escribir comentario
Más
€ 21.00
Añadir al carro
En stock
Descripción

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM functio

  • Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header
  • In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
  • There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
  • Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control.
  • If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.

Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis. Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control. If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED.

What should I do when my motherboard runs out of RGB and fan headers? (I have an Asus Prime X570-Pro and it has 3fan headers and I think 2 RGB headers) I

PWM FAN HUB with RGB Led Light Effect 5 Ports 4pin 1 to 5 Fan Adapter Splitter $14.76 - PicClick AU

EASY: Expands one motherboard PWM fan header to connects up to 4 fans. Compatible with all 3-Pin and 4-Pin PWM fans. Features sleeve cabling for seamless cable management and pre-applied adhesive tape for easy installation. SUPPORTS: Excellent 4-pin PWM 1 to 5 splitter fan power supply extension cable for PC computer motherboard fans, make you easier DIY PC computer case. Designed for enthusiasts to facilitate controls of numerous system fans.

Gelid 1-to-4 PWM Fan Hub Cable

EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan Power Splitter Adapter Cable w/ Self-sticker for 3Pin / 4Pin fan

4 PIN PWM FAN SPLITTER HUB FOR PC, UNBOXING/REVIEW

【1-to-7 PWM Fan Hub】The fan hub splitter can support up to 7 fans. The extension cable offers greater flexibility between motherboard and CPU cooling

ID-COOLING FH-07 SATA Powered Fan Hub with 7 PWM Ports Hub Splitter for 4-Pin & 3-Pin Computer Internal Fans

5 Best PWM Fan Hub Controllers in 2024 (Efficient PC Cooling Management)

PWM FAN HUB with RGB Led Light Effect 5 Ports 4pin 1 to 5 Fan Adapter Splitter $14.76 - PicClick AU

PWM Fan Hub - Supports 10 CPU Fans, 4 Pin Splitter UK